1, is limited, mistakes inevitably Department, in particular vocabulary, the translation may not be popular and accurate. Please add, correct me;
2, the manual sorting blueprint for the BOSS GT-3, GT-5 original operating manual, insignificant part of the order is not made;
3, to save time and space, this manual is not with photos, related illustrations, please see the GT effects on their own original operating manual;
4, GT-3 and GT-5 in the device construction, operation similar use of the same section, all were described to GT for the name of the representatives, will focus on different parts of reference and description;
5, special thanks to: Friends of plus fellow piano \
6, the manual for further refinement and revision, if any friends want to reprint, please be sure and I say hello first.
============================================ =========================
Chapter I: Introduction
1, structure (in GT-3 for the cases, from left to right, top to bottom order of instructions)
on the panel:
1, liquid crystal display
2, VALUE knob (numerical round) < br>
3, BANK pedal: GT-3 has two, GT-5 1, is used to transform sound group
4, feet (big pedal, expression pedal, volume pedal)
5, set the button (more)
6, small pedal: GT-3 with 4, GT-5 with five transform small pedal, used to transform the sound of a group number, the most the right is a control pedal (C pedal)
back of the board:
1, INPUT: input jack, then electric guitar
2, LEVEL: output level (power level) knob
3, OUTPUT R: right output jack, then speakers and other equipment
4, OUTPUT L (MONO): left output jack, either stereo output the use of speakers to this jack and other equipment
5, PHONES: headphone jack, this jack to 3.5mm stereo mini jack output, you can also take advantage of this jack mixer
6, SEND: external effects (effects device) output jack, then the external effects (effects device) input jack
7, RETURN: external effects (effects device) input jack, then external effects (effects device) output jack
8, SUB EXP PEDAL: access to external expression pedal jack
9, MIDI IN: MIDI input jack
10, MIDI OUT: MIDI output jack
11, POWER: GT power switch button
12, AC IN 14V: 14V DC transformer power input jack
= ================================================== ==================
2, the connection
the GT with the guitar, speakers and other equipment connected after the power on. Connection order: Guitar-GT effects - speakers (or mixer, headphones and other related equipment).
1, to prevent the speaker or other related equipment failure or damage, before wiring speakers please turn it down or cut off power to all devices;
2, turn on all devices, then adjust Speaker volume;
3, single-channel output, set the output line connected OUTPUT L (MONO) jack;
4, using an external expression pedal (sold separately), please ROLAND purchase the company's related products;
5, when using the expression pedal, turn the LEVEL GT lever adjust the volume to a minimum (MIN), and the polarity of the pedal on the back panel switch (Polarity Switch) Slide the left.
============================================ =========================
3, boot and preparation
1, boot
connected correctly, please turn the following order (off hand):
GT effects - external effects (if any) - Speaker (amplifier, mixer and other equipment)
If the order is incorrect, may result in equipment malfunction or damage. wait a few seconds after boot
, GT effects into the running state (GT effects with protection circuit), this time, LCD screen off the last number before the final selection of the sound.
2,Electric Guitar Electric, adjust the input level (GT-3 is not the knob, the function of the GT-5 all)
each guitar's output level varies with the back of the board Input Volume (input volume) adjustment knob until the appropriate input level is too high, GT will not produce the desired results. Methods:
in the normal state of the guitar volume knob at maximum and then to play, adjust the Input Volume (input volume) knob until the OVERLOAD light is briefly displayed (the indicator lights up quickly when the 6dB , this time for the distortion at the beginning level).
GT-3 input levels can be adjusted by the guitar volume knob.
3, adjust the output level
GT-5's output level adjustment knob adjustment knob in the panel (the value of round) to the right, GT-3 in the back of the plate (LEVEL knob) . According to adjust equipment and the actual situation.
4, connect the equipment to set
this feature to specify the type of output device.
(1), lower right panel by clicking on the [UTILITY] button to set the button indicator lights, LCD screen displays the button to enter the first set: Global, then there \words;
(2), rotating VALUE numerical round, set the type of output device, there are several:
GT.Amp (Combo): one of the speaker amplifier and speakers, then the speaker of the guitar input jack
GT.Amp (Stack): amplifiers and speakers split the speaker, then the speaker of the guitar input jack
Power.Amp (Combo): integrated speaker amplifier and speakers, then the speaker of the MAIN IN (primary input) or RETURN (Return) jack
Power.Amp (Stack): amplifier and speakers split the speaker, then the speaker of the MAIN IN or RETURN jack
Line (Headphone): then the mixer, and other recording equipment, headphones
(3), press [EXIT] button to complete the set
= ================================================== ==================
4, select the sound
1, What is sound?
GT is a synthetic type of electric guitar effects, you can set a good tone as a result of various different combinations (more than one block effects connected to the final sound), sound E-text: Patch
GT-5's Patch (sound) by the Group (Group), Bank (bank) and the Number (No.) to form and said that a total of 250 preset sound.
which user group (User Groups) in the sound can be user-edited and saved, BANK number is bright display,Electric Guitar Lessons, preset groups in the sound can edit, temporary use, but can not save the edited settings is cured, BANK No. anti-light display.
(can be saved to the user group, covering one user group in tone)
2, the GT-5 sound
choose to switch groups, libraries, and number to sound choices. Selection of the sound will be displayed in the LCD screen inside. VALUE value can rotate round selection.
(1), only to change the numbers: pressure corresponding number of small pedal, then pedal indicator light;
(2), change the library: Pressure BANK pedal (if canceled further pressure on the first) - the corresponding number of pedal pressure, select the library - and then select the sound pressure numbers pedal
(3), change the group: repeatedly press the [Group] button to call out the BANKS - No pedal sound reduction options. (You can also pressure [Group] button while turning the choice of numerical round for groups)
3, GT-3 sound that basically the same GT-5, only to be simpler, just Bank ( Library) and the Number (No.) can be. GT-3 has 340 preset sounds, Bank1-Bank85, each library has four sounds, of which 1-35's sound library users can edit, store.
4, GT-3 GT-5 than the choice of simple methods:
(1), in the normal state, turning numerical round
(2), BANK pedal pressure, select BANK, then depressed numbers of small pedal, select the corresponding sound
========================= ============================================
5, tuner / bypass (direct) feature
Press [TUNER / BYPASS] button indicator lights up, then enter through the state GT, tuning feature also be open. (GT-5 can also control pedal into the state)
access through state, a snapping sound, LCD screen shows the name and pitch bias direction when the light of the small center on behalf of the same pitch and standard pitch.
at this time can do more settings, such as the standard pitch, chord name display (GT-3 can not set this), through volume, etc., is: Press [TUNER / BYPASS], the then press the [PARAMETER] (left arrow) to select settings item, value wheel rotation specific regulation project.
is set up, press the [EXIT] or press a [TUNER / BYPASS] return.
Note: The standard pitch is A4 note the physical vibration frequency (the piano in the central A, 440Hz), all sound the pitch this as a standard tuning, GT effect allows users to Accent Set in the 435-445Hz high between the frequency of a vibration.
No comments:
Post a Comment